SIEMENS-SIPLUS SM 1226 fail-safe digital input
SIMATIC S7-1200 Basic Controllers
I/O modules
SIPLUS Fail-safe digital inputs and outputs
SIPLUS SM 1226 fail-safe digital input
อินพุตดิจิทัลแบบปลอดภัย SIPLUS SM 1226 สำหรับระบบควบคุมอัตโนมัติ SIMATIC S7-1200
| Overview | ข้อมูลสินค้า |
|---|---|
| Digital inputs as supplement to the integral I/O of the CPUs | อินพุตดิจิทัลเสริม สำหรับขยาย I/O ของ CPU ในระบบควบคุมอัตโนมัติ |
| Integrated into the overall automation for the implementation of safety-related requirements | ผสานเข้ากับระบบอัตโนมัติทั้งหมด เพื่อรองรับการควบคุมตามข้อกำหนดด้านความปลอดภัย |
| With integrated safety functions | มาพร้อมฟังก์ชันความปลอดภัยในตัว เพื่อเสริมสร้างความมั่นคงของระบบ |
| Communication with fail-safe CPUs via PROFIsafe mechanisms | สื่อสารกับ CPU แบบปลอดภัยผ่านเทคโนโลยี PROFIsafe |
| For flexible adaptation of the controller to the corresponding task | รองรับการปรับแต่งคอนโทรลเลอร์ให้เหมาะกับแต่ละภารกิจอย่างยืดหยุ่น |
| For subsequent expansion of the system with additional inputs | รองรับการขยายระบบในอนาคต ด้วยการเพิ่มอินพุตเพิ่มเติม |
| Operable exclusively in the central system | รองรับการทำงานเฉพาะในระบบควบคุมศูนย์กลาง (Central System) |
| Note: SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added | หมายเหตุ: ผลิตภัณฑ์ SIPLUS extreme พัฒนาต่อยอดจากผลิตภัณฑ์มาตรฐานของ SIMATIC โดยเพิ่มคุณสมบัติพิเศษสำหรับใช้งานในสภาพแวดล้อมที่รุนแรง |
| Ordering data | Article No |
| SIPLUS SM 1226 fail-safe digital input signal module (Extended temperature range and environmental stress) 16 inputs, 24 V DC (SIL 2/category 3/PL d) or 8 inputs 24 V DC (SIL 3/category 3 or category 4/PL e) or a combination of both | 6AG1226-6BA32-5XB0 |
| Accessories | See SIMATIC SM 1226 fail-safe digital input signal module, page 3/175 |
| หัวข้อ | รายละเอียด |
|---|---|
| Article number | 6AG1226-6BA32-5XB0 6ES7226-6BA32-0XB0 |
| Based on | SIPLUS S7-1200 SM 1226 F-DI 16x24VDC |
| Ambient temperature during operation | • min.: -25 °C = Tmin • max.: 55 °C = Tmax |
| Altitude during operation relating to sea level | • Installation altitude above sea level, max.: 2 000 m • Ambient air temperature-barometric pressure-altitude: Tmin … Tmax at 1 140 hPa … 795 hPa (-1 000 m … +2 000 m) |
| Relative humidity | • With condensation, tested in accordance with IEC 60068-2-38, max.: 100 %; RH incl. condensation/frost (no commissioning under condensation conditions) |
Technical specifications
| Article number | 6AG1226-6DA32-5XB0 |
| Based on | 6ES7226-6DA32-0XB0 |
| SIPLUS S7-1200 SM 1226 F-DQ 4x24VDC | |
| Ambient conditions | |
| Ambient temperature during operation | |
| • min. | -25 °C; = Tmin |
| • max. | 55 °C; = Tmax |
| Altitude during operation relating to sea leve | |
| • Installation altitude above sea level, max | 2 000 m |
| • Ambient air temperature-barometric pressure-altitude | Tmin … Tmax at 1 140 hPa … 795 hPa (-1 000 m … +2 000 m) |
| Relative humidity | |
| • With condensation, tested in accordance with IEC 60068-2-38, max | 100 %; RH incl. condensation/frost (no commissioning under condensation conditions) |
| Resistance | |
| Coolants and lubricants | |
| – Resistant to commercially available coolants and lubricants | Yes |
| Use in stationary industrial systems | |
| – to biologically active substances according to EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request |
| – to chemically active substances according to EN 60721-3-3 | Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); * |
| – to mechanically active substances according to EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust, * |
| Use on ships/at sea | |
| – to biologically active substances according to EN 60721-3-6 | Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request |
| – to chemically active substances according to EN 60721-3-6 | Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); * |
| – to mechanically active substances according to EN 60721-3-6 | Yes; Class 6S3 incl. sand, dust; * |
| Usage in industrial process technology | |
| – Against chemically active substances acc. to EN 60654-4 | Yes; Class 3 (excluding trichlorethylene) |
| – Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04 | Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil) |
| Remark | |
| – Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04 | * The supplied plug covers must remain in place over the unused interfaces during operation! |
| Conformal coating | |
| • Coatings for printed circuit board assemblies acc. to EN 61086 | Yes; Class 2 for high reliability |
| • Protection against fouling acc. to EN 60664-3 | Yes; Type 1 protection |
| • Military testing according to MIL-I-46058C, Amendment 7 | Yes; Discoloration of coating possible during service life |
| • Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A | Yes; Conformal coating, Class A |
