SIMATIC S7-1200 Basic Controllers
I/O modules
Special modules
SIPLUS SM 1278 4xIO-Link Master
ㆍ Module for connecting up to 4 IO-Link devices according to
IO-Link Specification V1.1. The IO-Link parameters are
configured using the Port Configuration Tool (PCT),
Version V3.2 and higher.
Note:
SIPLUS extreme products are based on SIMATIC standard
products. The contents listed here were taken from the
respective standard products. SIPLUS extreme-specic
information was added.
| Ordering data | Article No. |
| SIPLUS SM 1278 4xlO-Link Master signal module |
|
| (Extended temperature range and exposure to environmental substances) |
|
| ㆍ For areas with exceptional exposure to environmental substances (conformal coating) |
6AG1278-4BD32-4XB0 |
| ㆍ -25 … +70 “C,from +60 … +70 *C number of simultaneously controllable inputs and outputs max. 50% |
6AG1278-4BD32-2XB0 |
| Technical specifications | ||
| Article number Based on |
6AG1278-4BD32-2XB0 6ES7278-4BD32-0XB0 SIPLUS S7-1200 SM 1278 IO-Link Master |
6AG1278-4BD32-4XB0 6ES7278-4BD32-0XB0 SIPLUS S7-1200 SM 1278 IO-Link Master |
| Ambient conditions Ambient temperature during operation ㆍmin. ㆍmax. ㆍ At cold restart, min. |
-40 “C; = Tmin (incl. condensation/frost); start-up -25 “C ’70 *C; = Tmax ‘-25 *C |
-20 “C; = Tmin (incl. condensation/frost), start-up @ 0 “C 60 *C; = Tmax 0 *C |
| Altitude during operation relating to sea level ㆍ Installation altitude above sea level, max. |
5 000 m | 5 000 m |
| ㆍ Ambient air temperature-barometric pressure-altitude |
Tmin … Tmax at 1 140 hPa … 795 hPa (-10000 m … +2 000 m) // Tmin … (Tmax – 10 K) at 795 hPa … 658 hPa (+2 000 m … +3 500 m) // Tmin … (Tmax -20 K) at 658 hPa … 540 hPa (+3 500 m … +5 000 m) |
Tmin … Tmax at 1 140 hPa … 795 hPa (-10000 m … +2 000 m) // Tmin … (Tmax – 10 K) at 795 hPa … 658 hPa (+2 000 m … +3 500 m) // Tmin … (Tmax -20 K) at 658 hPa … 540 hPa (+3 500 m … +5 000 m) |
| Relative humidity With condensation, tested in accordance with IEC 60068-2-38, max. |
100 %; RH incl. condensation/frost (no commissioning under condensation conditions) |
100 %; RH incl. condensation/frost (no commissioning under condensation conditions) |
| Resistance Coolants and lubricants – Resistant to commercially available coolants and lubricants |
Yes; Incl. diesel and oil droplets in the air | Yes; Incl. diesel and oil droplets in the air |
| Use in stationary industrial systems – to biologically active substances according to EN 60721-3-3 – to chemically active substances according to EN 60721-3-3 – to mechanically active substances according to EN 60721-3-3 |
Yes; Class 382 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); * Yes; Class 3S4 incl. sand, dust, * |
Yes; Class 382 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); * Yes; Class 3S4 incl. sand, dust, * |
| Use on ships/at sea – to biologically active substances according to EN 60721-3-6 – to chemically active substances according to EN 60721-3-6 – to mechanically active substances according to EN 60721-3-6 |
Yes; Class 682 mold and fungal spores (excluding fauna); Class 6B3 on request Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); * Yes; Class 6S3 incl. sand, dust; * |
Yes; Class 682 mold and fungal spores (excluding fauna); Class 6B3 on request Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); * Yes; Class 6S3 incl. sand, dust; * |
| Usage in industrial process technology |
||
| – Against chemically active substances acc. to EN 60654-4 ‘- Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04 |
Yes; Class 3 (excluding trichlorethylene)
Yes; Level GX group A/B (excluding trichlorethylene; |
Yes; Class 3 (excluding trichlorethylene)
Yes; Level GX group A/B (excluding trichlorethylene; |
| Remark | ||
| – Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04 |
* The supplied plug covers must remain in place over the unused interfaces during operation! |
* The supplied plug covers must remain in place over the unused interfaces during operation! |
| Conformal coating | ||
| ㆍ Coatings for printed circuit board assemblies acc. to EN 61086 ㆍ Protection against fouling acc. to EN 60664-3 ㆍ Military testing according to MIL-I-46058C, Amendment 7 ㆍ Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A |
Yes; Class 2 for high reliability
Yes; Type 1 protection Yes; Discoloration of coating possible during service life Yes; Conformal coating, Class A |
Yes; Class 2 for high reliability
Yes; Type 1 protection Yes; Discoloration of coating possible during service life Yes; Conformal coating, Class A |
