ProTec T1S-50kA Surge Protection Device (SPD) ปลั๊กอินป้องกันไฟกระชาก มาตรฐานสากล IEC/EN
Overvoltage Protection (PGDT Technology)
ProTec T1S 35kA & 50kA Series
Special features:
- Leakage current free solution, Class I, = 35 kA & 50 kA
- Low voltage protection level, < 2.5 kV
- Can be installed in IT systems (Only SPD with 440 V)
- No external backup fuse required up to 500 A
- Vibration and shock withstand capability
- Sensitive and reliable state-of-the-art disconnector
- Short circuit current rating up to 100 kA
-
Compact power package, 35 kA & 50 kA in 2 TE
IEC 61643-11:2011 | EN 61643-11:2012+A11:2018
✓ ✓
The ProTec T1S combines lightning current and surge arrester performance. The multi-gap tube technology enables the extinction of follow current under severe short-circuit conditions at a wider range, from just a few kA up to 50kA, while also preventing the tripping of upstream fuses, thus ensuring sustainable system operation. Ease of installation in single or three phase systems is further simplified by universal energy coordination with not only Raycap’s units but any other brand without additional cable length. By using a unique thermal disconnection mechanism, optimal system protection can be achieved under all kinds of overloads, setting world standards in “spark-gap” performance technologies. The operating state indicator requires no power to operate, instantly showing the operating state of the surge protective device. Besides the visual mechanical indicator, products featuring remote contacts (RC) provide a three-pole remote signaling terminal that enables users to remotely monitor the operating state of their devices.
รายละเอียดสินค้า
ProTec T1S-50 Series จาก Raycap เป็น Surge Protective Device (SPD) ชนิด Pluggable Single-Pole ที่รวมคุณสมบัติทั้ง Class I และ Class II / Type 1 และ Type 2 อยู่ในตัวเดียว เหมาะสำหรับการติดตั้งใน ตู้ไฟฟ้าหลัก (Main Distribution Boards) เพื่อป้องกันแรงดันไฟกระชากที่เกิดจากฟ้าผ่า (Lightning Current) และการกระชากแรงดันไฟฟ้าเกิน (Overvoltage) ภายในระบบ
ตัวอุปกรณ์ใช้เทคโนโลยี Multi-gap Tube (PGDT Technology) ช่วยจัดการกระแสฟ้าผ่าได้สูงสุดถึง 50 kA ต่อโพล์ พร้อมกลไกตัดวงจรความร้อน (Thermal Disconnector) ที่มีความไวและปลอดภัย มั่นใจได้ว่าอุปกรณ์ในระบบของคุณจะได้รับการปกป้องเต็มประสิทธิภาพ
Technical Data
ProTec T1S-50-xxx-1+0(-R)
| IEC Electrical | ||
| Nominal AC Voltage (50/60Hz) | 240 V | |
| Maximum Continuous Operating Voltage (AC) | 275 V | |
| Nominal Discharge Current (8/20μs) | 50 kA | |
| Maximum Discharge Current (8/20μs) | 50 kA | |
| Impulse Discharge Current (10/350μs) | 50 kA | |
| Specific Energy | W/R | 625 kJ/Ω |
| Charge | Q | 25 As |
| Voltage Protection Level | 1500 V | |
| Rated Load Current | 100 A | |
| Response Time | < 100 ns | |
| Overcurrent Protection (max) | 500 A gG | |
| Short-Circuit Current Rating (AC) | 100 kA | |
| Follow Current Interrupt Rating (AC) | 100 kA | |
| TOV Withstand 120min | 442 V | |
| Number of Ports | 1 | |
| Additional Electrical Parameters – Standard (Tests performed within Raycap testing laboratory only) | ||
| Residual Voltage at 5 kA (8/20μs) | 1000 V | |
| Overcurrent Protection (min) | 500 A gG | |
| Additional Electrical Parameters – Extended (Additionally tested by VDE) | ||
| Short-Circuit Current Rating (AC) | 100 kA | |
| Overcurrent Protection (max) | 500 A gG | |
| Mechanical & Environmental | ||
| Operating Temperature Range | -40 °F to +185 °F [-40 °C to +85 °C] | |
| Permissible Operating Humidity | RH | 5%..95% |
| Altitude | 13123 ft [4000 m] | |
| Terminal Screw Torque | 40 lbf-in [4.5 Nm] | |
| Conductor Cross Section (max) | 2 AWG (Solid, Stranded) / 4 AWG (Flexible) 35mm² (Solid, Stranded) / 25mm² (Flexible) | |
| Mounting | 35 mm DIN Rail, EN 60715 | |
| Degree of Protection | IP 20 (built-in) | |
| Housing Material | Thermoplastic: Extinguishing Degree UL 94 V-01 | |
| Thermal Protection2 | Yes3 | |
| Operating State / Fault Indication4 | Green Flag / Not Green Flag5 | |
| Remote Contacts (RC)6 | Optional7 | |
| RC Switching Capacity8 | AC: 250V/1A, 125V/1A; DC: 48V/0.5A, 24V/0.5A, 12V/0.5A9 | |
| RC Conductor Cross Section (m10ax) | 16 AWG (Solid) / 1.5mm² (Solid) |
Internal Configuration
ProTec T1S-50-xxx-1+0(-R)
Order Information
| Order Code | 275 |
| ProTec T1S-50-xxx-1+0 | 59.A533 |
| ProTec T1S-50-xxx-1+0-R (with remote contacts) | 59.A534 |
| ProTec T1S-50-xxx-P (plug) | 59.A535 |
Dimensions & Packaging
Complete Unit (inches [mm])
| 275 | ||
| ProTec T1S-50-xxx-1+0 | ||
| Weight | pounds [grams] | .623 [283] |
| ProTec T1S-50-xxx-1+0-R | 275 | |
| Weight | pounds [grams] | .643 [292] |
| DIN 43880 Dimension | 2TE / 1.42 [36] | |
| Packaging Dimensions (HxWxL) | 4.3 x 4.5 x 13.8″ [109 x 115 x 352 mm] | |
| Standard Order Quantity | 7 Units |
Spare Plug
Single Unit
| 275 | ||
| ProTec T1S-50-xxx-P | ||
| Weight | pounds [grams] | .412 [187] |
| DIN 43880 Dimension | 2TE / 1.42 [36] | |
| Packaging Dimensions (HxWxL) | 4.3 x 4.5 x 13.8″ [109 x 115 x 352 mm] | |
| Standard Order Quantity | 16 Units |
