วันจันทร์ - วันเสาร์ 8:00 น. - 17:00 น.

📞 📞

Quickly check fiber activity, polarity, and connectivity

FIBERLERT-125

FiberLert™ Detector

Part#: 5317262
UPC#: 1 95112 03566 5

Includes:

  • FiberLert™ Detector
  • Instruction card
  • 2 AAA batteries

Just place in front of the fiber end face or port and a light and tone indicate an active fiber (850 nm to 1625 nm) – no setup or interpretation required.

This pocket-sized tool tests:

  • Single-mode
  • Multimode
  • UPC and APC patch cords
  • Ports with a non-contact / non-contaminating detector

The LightBeat™ feature flashes the LED, indicating a powered-on condition and good battery and a timer shuts FiberLert™ Detector off after five minutes of inactivity to extend battery life (2xAAA, included). Rugged design includes a convenient pocket clip and is backed by a two-year warranty.

 

 

Specifications: Fluke Networks FiberLert™ Detector

Specifications
Operating Principle FiberLert is a live fiber detector that senses near infrared light emitted from fiber optic cabling. A continuous red glow at the handle and an audible beeping noise (if not switched off) indicates the presence of near infrared light.
Optical Interface Non-contact ceramic ferrule. Fits directly with 1.25 mm LC receptacles. Tethered ferrule adapter for testing 1.25 mm ferrule patch cord. Supports single-mode, multimode, UPC and APC connectors and ports.
Wavelength Detection 850 nm to 1625 nm
Optical Power Detection Range +3 dBm to -30 dBm
Light Detection Visible steady red LED indicator when optical power is detected
Lightbeat™ Indicator Flashes twice every two seconds when unit is on and battery strength is sufficient.
Battery Saver Unit automatically turns off after five minutes of inactivity
Batteries 2 AAA alkaline batteries included
Battery Life Typically, greater than 1 year (5 hrs. of use a week)
Item Size 0.6” x 1.0” x 6.6” / 1.6 x 2.5 x 16.8 cm
Item Weight 2.1 oz / 59 g
Operating Temperature Range -10 °C to 50 °C
Operating Humidity Ranges

95 % (10 °C to 35 °C)

Non-condensing 75 % (35 °C to 40 °C)

Non-condensing uncontrolled < 10 °C

Operating Altitude ≤ 3000 meters
Storage Temeperature -20 °C to 50 °C

สินค้าที่เกี่ยวข้อง

ติดต่อสอบถามเพิ่มเติม

โทรติดต่อ

085-838-2423
085-150-5506
062-381-5341

อีเมล

sale@enscigroup.com

เปิดทำการ

จันทร์ - เสาร์
08.00 - 17.00 น.

สอบถามผ่าน Social Media

Fluke Networks FiberLert™ Detector