• Digital inputs as supplement to the integral I/O of the CPUs
• Integrated into the overall automation for the implementation
of safety-related requirements
• With integrated safety functions
• Communication with fail-safe CPUs via PROFIsafe
mechanisms
• For flexible adaptation of the controller to the corresponding
task
• For subsequent expansion of the system with additional inputs
• Operable exclusively in the central system
| Ordering Data | Article No. |
|---|---|
| SIMATIC S7-1200, SM 1226 digital input moduleF-DI 16x 24 V DC, PROFIsafe, 70 mm size, up to PL e (ISO 13849-1)/ SIL3 (IEC 61508) | 6ES7226-6BA32-0XB0 |
| Accessories | |
| Terminal block (spare part) | |
| SIMATIC S7-1200, spare part, tin-coated I/O terminal blockDigital signal module 32CH (4 units with 11 screws each) | 6ES7292-1AL30-0XA0 |
| Front flap set (spare part) | |
| SIMATIC S7-1200, spare part front flaps signal module 70 mm(signal module 70 mm wide front flap top & bottom) 6 units each | 6ES7291-1BB30-0XA0 |
| STEP 7 Safety Advanced V19Task: Engineering tool for configuring and programming fail-safe user programs for SIMATIC S7-1200 FC, S7-1500F, S7-1500F Software Controller, S7-300F, S7-400F, WinAC RTX F, ET 200SP F Controller and the fail-safe ET 200SP, ET 200MP, ET 200S, ET 200M, ET 200iSP, ET 200pro and ET 200eco I/ORequirement: STEP 7 Professional V19Note: As of TIA Portal V16, the SIMATIC STEP 7 Safety software is an integral component of the SIMATIC STEP 7 product setup. The functionality of SIMATIC STEP 7 Safety is activated by means of the license key supplied in each case. | |
| SIMATIC S7, F programming tool; STEP 7 Safety Advanced V19; engineering software; floating license for 1 user; license key on USB flash driveClass A, 2 languages (en, de); runs with TIA Portal V19 STEP 7 Professional V19; for configuring SIMATIC S7-1200F/1500F, SIMATIC S7-1500F SW Controller, SIMATIC S7-300F/400F/WinAC FContent: 1x USB | 6ES7833-1FA23-0YA5 |
| Ordering data | Article No. |
|---|---|
| SIMATIC S7, F programming tool; STEP 7 Safety Advanced V19; engineering software, floating license for 1 user; license key for download1) Class A, 2 languages (en, de); runs with TIA Portal V19 STEP 7 Professional V19; for configuring SIMATIC S7-1200F/1500F, SIMATIC S7-1500F SW Controller, SIMATIC S7-300F/400F/WinAC F Consignee email address required for delivery | 6ES7833-1FA23-0YH5 |
| STEP 7 Safety Basic V19 Task: Engineering tool for configuring fail-safe user programs for SIMATIC S7-1200 FC Requirement: STEP 7 Basic V19 or higher Note: As of TIA Portal V16, the SIMATIC STEP 7 Safety software is an integral component of the SIMATIC STEP 7 product setup. The functionality of SIMATIC STEP 7 Safety is activated by means of the license key supplied in each case. | |
| SIMATIC S7, F programming tool; STEP 7 Safety Basic V19, engineering software; floating license for 1 user; license key on USB flash drive Class A, 2 languages (en, de); runs with TIA Portal V19 as of STEP 7 Basic V19; for configuring SIMATIC S7-1200F Content: 1x USB | 6ES7833-1FB23-0YA5 |
| SIMATIC S7, F programming tool; STEP 7 Safety Basic V19, engineering software; floating license for 1 user; license key for download1) Class A, 2 languages (en, de); runs with TIA Portal V19 as of STEP 7 Basic V19; for configuring SIMATIC S7-1200F Consignee email address required for delivery | 6ES7833-1FB23-0YH5 |
| หัวข้อ | รายละเอียด |
|---|---|
| Article number | 6ES7226-6BA32-0XB0 |
| Digital Input SM 1226, F-DI 16x 24VDC | |
| General information | |
| Product type designation | SM 1226, F-DI 16×24 V DC |
| Supply voltage | |
| Rated value (DC) | 24 V |
| Input current | |
| from backplane bus 5 V DC, max. | 155 mA; Current consumption (SM Bus, 5 V DC): 155 mA |
| Digital inputs | |
| from load voltage L+ (without load), max. | 130 mA; 130 mA + 6 mA / input used + any Vs1/Vs2 current used |
| Number of digital inputs | 16; 16 (1oo1) or 8 (1oo2); Note: You can individually assign each pair of inputs “a.x” and “b.x” as a single (1oo2)-channel or as 2 separate (1oo1)-channels |
| Number of simultaneously controllable inputs | |
| horizontal installation – up to 50 °C, max. | 16; 16 inputs at 55 °C horizontal |
| vertical installation – up to 40 °C, max. | 16; 16 inputs at 45 °C vertical |
| Input voltage | |
| for signal “0” | -30 V DC to +5 V DC |
| for signal “1” | 15 V DC to 30 V DC |
| Input current | |
| for signal “0”, max. (permissible quiescent current) | 0.5 mA |
| for signal “1”, typ. | 5 mA |
| Input delay (for rated value of input voltage) | |
| for standard inputs – parameterizable | Yes; 0.8 / 1.6 / 3.2 / 6.4 / 12.8 ms |
| Interrupts/diagnostics/status information | |
| Diagnostics indication LED – for status of the inputs | Yes |
| หัวข้อ | รายละเอียด |
|---|---|
| Article number | 6ES7226-6BA32-0XB0 |
| Digital Input SM 1226, F-DI 16x 24VDC | |
| Degree and class of protection | |
| IP degree of protection | IP20 |
| Standards, approvals, certificates | |
| CE mark | Yes |
| cULus | Yes |
| FM approval | Yes |
| Highest safety class achievable in safety mode | |
| Performance level according to ISO 13849-1 | 1-channel, Category 3, PL d; 2-channel, Category 3 or 4, PL e |
| SIL acc. to IEC 61508 | SIL 2 (single-channel), SIL 3 (two-channel) |
| Ambient conditions | |
| Ambient temperature during operation – min. | 0 °C |
| Ambient temperature during operation – max. | 55 °C |
| Mechanics/material | |
| Enclosure material (front) – Plastic | Yes |
| Dimensions | |
| Width | 70 mm |
| Height | 100 mm |
| Depth | 75 mm |
| Weights | |
| Weight, approx. | 250 g |
