SPD TYPE 1 & TYPE 2 : COMBINED B+C (Removable Module)
FLP-B+C MAXI VS
Combined Lightning and Surge Arrester MOV and Spark-Gap อุปกรณ์ป้องกันเสิร์จในระบบไฟฟ้าสำหรับติดตั้งภายในตู้ MDB (Main Distribution Board) ช่วยป้องกันความเสียหายของระบบไฟฟ้าจากเสิร์จในย่าน LPZ 0A และ LPZ 1 อีกทั้งยังช่วยป้องกันผลกระทบอันเนื่องจากสภาวะ Overvoltage และ Switching Overvoltage ที่เกิดขึ้นในขณะฟ้าฝ่า (Lightning Strike)
รุ่น | FLP-B+C MAXI V/3 | FLP-B+C MAXI V/4 | FLP-B+C MAXI V/3+1 | FLP-B+C MAXI V/3+1 |
SPECIFICATIONS | L-N | N-PE | ||
R5093 | R5094 | R5096 | R5096 | |
SPD | Type 1 and Type 2 | Type 1 and Type 2 | Type 1 and Type 2 | Type 1 and Type 2 |
Nominal Voltage [Un] | 230 / 400 V | 230 / 400 V | 230 / 400 V | – |
Maximum Operation Voltage (10/350 Uc) | 260 /450 V | 260 /450 V | 260 /450 V | 255 /440 V |
Lightning Impulse Current (10/350 μs) [L1+L2+L3+N-PE] | 75 kA | 100 kA | 75 kA | 100 kA |
Lightning Impulse Current (10/350 μs) [L,N-PE] | 25 kA | 25 kA | 25 kA | 100 kA |
Nominal Discharge Current (8/20 μs) | 30 / 90 kA | 30 / 120 kA | 30 / 90 kA | 100 kA |
Maximum Discharge Current (8/20 μs) | 60 /180 kA | 60 /240 kA | 60 /180 kA | 100 kA |
Voltage Protection Level | 1.5 kV | 1.5 kV | 1.5 kV | 1.5 kV |
Response Time | < 100 ns | < 100 ns | < 100 ns | < 100 ns |
Ability to Independently Switch off the Following Current | No Following Current | No Following Current | No Following Current | 100 A |
Short-Circuit Proof at Maximum Overcurrent Protection | 50 kA (rms) | 50 kA (rms) | 50 kA (rms) | – |
Maximum Overcurrent Protection | 250 A gL/gG | 250 A gL/gG | 250 A gL/gG | – |
Maximum Overcurrent Protection for Serial Connection | 125 A gL/gG | 125 A gL/gG | 125 A gL/gG | – |
Degree of Protection | IP-20 | |||
Range of Operating Temperature | -40℃ to +80℃ | |||
Mounting on | DIN Rail 35 mm. | |||
Cross Section of Connected Conductors | ||||
Solid min/max | ISO : 10/50 mm² | |||
Stranded min/max | ISO : 10/35 mm² | |||
Stripping Length of the Supply Conductor | 14 mm. | |||
Tightening Torguer | Max 4 Nm. | |||
Max Backup Fuse | 125 A / Phase | |||
SPD Fault indication | Red indication field | |||
Remote indication-S design (option) | Potential-free change over contact | |||
Remote indication contacts (option) | 250 VAC/0.5 A , 250 VDC/0.1 A | |||
Cross section of remote indication conductors | Max. 1.5 mm² | |||
Standard Approve | EN61643-11+A11 T1 T2 |
Download รายละเอียดสินค้า